← Papers

Paper record

Comparison of ALS- and UAV(SfM)-derived high-density point clouds for individual tree detection in Eucalyptus plantations

Juan Guerra-Hernández · Diogo Nepomuceno Cosenza · Luiz Carlos Estraviz Rodriguez · Margarida Silva · Margarida Tomé · Ramón Alberto Díaz Varela · Eduardo González‐Ferreiro

International Journal of Remote Sensing · 3 Jul 2018 · 10.1080/01431161.2018.1486519

Abstract

Highly accurate, rapid forest inventory techniques are needed to enable forest managers to address the increasing demand for sustainable forestry. In the last two decades, Airborne Laser Scanning (ALS) and Terrestrial Laser Scanning have become internationally established as forest mapping and monitoring methods. However, recent advances in sensors and in image processing – particularly Structure from Motion (SfM) technology – have also enabled the extraction of dense point clouds from images obtained by Digital Aerial Photography (DAP). DAP is cheaper than ALS, especially when the systems are mounted on small unmanned aerial vehicles (UAVs), and the density of the point cloud can easily reach the levels yielded by ALS devices. The main objective of this study was to evaluate and compare the usefulness of ALS-derived and UAV(SfM)-derived high-density point clouds for detecting and measuring individual tree height in Eucalyptus spp. plantations established on complex terrain. A total of 325 reference trees were measured and located in 6 square plots (400 m2). The individual tree crown (ITC) delineation algorithm detected 311 from the ALS-derived data and 259 trees from the UAV(SfM)-derived data, representing accuracy levels of, respectively, 96% and 80%. The results suggest that at plot level, UAV(SfM)-generated point clouds are as good as ALS-derived point clouds for estimating individual tree height. Furthermore, analysis of the differences in digital elevation models at landscape level showed that the elevations of the UAV(SfM)-derived terrain surfaces were slightly higher than the ALS-derived surfaces (mean difference, 1.14 m and standard deviation, 1.93 m). Finally, we discuss how non-optimal UAV-image-acquisition conditions and slope terrain affect the ITC delineation process.

Code and data availability

公開論文であることは確認できましたが、現在の公式API・許可済み取得経路では本文を自動取得できませんでした。

No evidence-backed public reproduction asset is currently recorded.